Filter
Top Products
“
Using the Caller List
28
Storing Caller List Information in the
Directory
You can store numbers that are in the Caller List in the directory.
Make sure the handset is in the standby mode.
1
Lift the handset off the base unit and
press (›) or (‹) to enter the Caller List.
2
Press (›) or (‹) repeatedly to find the
caller you want to store in the directory.
Press FWD/EDIT (fl) (Yes key).
≥If the number requires editing, see page 26.
3
Press (›) or (‹) to select “Save
directory”. Press FWD/EDIT (fl)
(Yes key).
a) If a name is not required, press (›)
(Next key) and FWD/EDIT (fl)
(Save key).
b) If a name is required, enter the name
(p. 34). When finished, press (›)
(Next key) and FWD/EDIT (fl)
(Save key).
≥A beep sounds.
≥The display will return to step 2. You can
continue storing other items.
To return to the standby mode, press (FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
≥If the display shows “Directory full” in step 3, the display will return to
step 2. Press (FUNCTION/EXIT/CH) to exit the list. To erase other stored items
from the directory, see page 41.
≥You cannot store caller information in the directory if a phone number is not
displayed.
0355566677
11:20A JAN.12 a3
Edit
1
Save directory
43
1
=Yes
10 new calls
43
1
=Directory
Enter name
21
4
=Next
Enter name
CINDY TURNER
21
4
=Next
CINDY TURNER
0355566677
1
=Save
1
Edit
Save directory
43
1
=Yes
For New Zealand Users:
Your telephone service provider may charge you for a local call when
it is dialled with an area code prefix. If the charge for local call is
unacceptable, only the 7-digits of the local number should be dialled
from your telephone. Do not dial the “0” prefix or the area code digit.