Filter
Top Products
Advanced Operation
29
“
When dialing a phone number with the restricted leading digit(s), the dialed
number will flash on the display, but not dialed out.
Call Restriction
You can prevent the unit from dialing phone numbers beginning with
specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted
leading digits cannot be dialed out.
To set the call restriction
Make sure that a call is not put on hold.
1
Press (PROGRAM).
2
Press (MUTE).
3
Press (1).
≥If you use “1111” as a PIN code (factory
set), the display on the right will be
shown. There is no need to enter a PIN
code. Go to step 6.
≥After the PIN code is changed, “– – – –”
will be displayed.
4
Enter the PIN code (p. 27).
(Ex. Your PIN code is “1234”.)
5
Press (PROGRAM).
≥If a wrong PIN code is entered, 3 beeps
will sound. Enter a correct PIN code and
press (PROGRAM).
≥The current setting is displayed. (Ex. “67”
is entered as the restricted digits.)
6
Enter the number(s) (1 digit or 2 digits)
you want to restrict ((0) to (9)).
(Ex. “12”
is entered as the restricted digits.)
≥If you enter a wrong number, enter a correct number.
≥To change restricted digits from 2 digits to 1 digit, press ($) for 2 digits to
change to “– –” and enter 1 digit.
7
Press (PROGRAM).
≥A long beep sounds.
≥The unit will return to the standby mode.
≥If your unit is connected to a PBX, this function may not operate. Contact your
PBX supplier for more information.
PQQX13204YA-03 01.11.28 8:36 AM y[W 29