Filter
Top Products
28
“
Special Features
To cancel the dial lock
Follow steps 1 through 3 above again.
≥“ ” will disappear, and the unit will return to the standby mode.
You can use the following features while the dialing buttons are locked.
≥Dialing a number you programmed into the memory of the EMERGENCY
button (p. 24)
≥Adjusting the handset and speakerphone volumes (p. 16)
≥Muting the conversation (p. 26)
≥Answering the second call by pressing (FLASH) (p. 25)
To set the dial lock
1
Press (DIAL\LOCK).
≥“ ” flashes on the display.
2
Enter the PIN code (p. 27).
3
Press (PROGRAM).
≥“ ” is displayed.
≥A long beep sounds.
≥If a wrong PIN code is entered, 3 beeps
will sound. Enter a correct PIN code and
press (PROGRAM).
≥The unit will return to the standby mode.
Dial Lock
You can prevent others from making a call to any number except the one
pre-programmed in the memory of the EMERGENCY button. Once you
locked the dialing buttons, even emergency numbers cannot be dialed.
Only incoming calls are accepted until the dial lock is canceled.
Before using this feature, we recommend
storing an emergency number in the memory
of the EMERGENCY button (p. 22). Even if
the dialing buttons are locked, the number
stored in the button can be dialed.
≥If you choose not to program emergency
numbers, but plan to use the dial lock, any
number programmed into the EMERGENCY
button can be accessed.
(EMERGENCY)
PQQX13204YA-03 01.11.28 8:36 AM y[W 28