Filter
Top Products
Caller ID Service
33
For assistance, please visit http://www.panasonic.com/help
– After the call is ended, the phone
number of the caller, when reviewed
from the Caller list, is displayed in the
same Format as the Edited Number.
For example, you can use this feature to
set the unit to ignore the area code of
callers in your area code, so that you can
call these local numbers using caller
information without dialing the area
code.
To activate this feature, you must edit an
item in the caller list, then call that
number. After that, phone numbers from
that caller’s area code are edited
automatically.
This feature can be turned on or off
(page 24).
Note:
L Phone numbers from the 4 most
recently edited area codes are
automatically edited.
L If you move to another area, you can
turn this feature off to erase previously
edited area codes. To use this feature
again, turn it on and reprogram the
area codes you want to edit once
again.
Erasing selected caller
information
1
{View CID}
2 {V}/{^}: Select the desired entry.
3 {Erase} i {Yes} i {OFF}
Erasing all caller information
1
{View CID}
2 {All erase} i {Yes}
Storing caller information into
the phonebook
1
{View CID}
2 {V}/{^}: Select the desired entry.
i {Select}
L To edit the number, press {Edit}
repeatedly until the phone
number is shown in the desired
format.
3 {Save}
4 {V}/{^}: “Phonebook” i
{Select}
L If there is name information for the
caller, go to step 6.
5 Enter the name (16 characters max.;
page 20). i {Next} i {Save}
6 {OFF}
TG936x_OI.book Page 33 Wednesday, January 2, 2008 9:12 AM