Filter
Top Products
Multi-unit Operation
For assistance, please visit http://www.panasonic.com/help 39
To establish a conference call:
Press {Conf}.
LTo leave the conference, press
{OFF}. The other parties can
continue the conversation.
LTo put the outside call on hold,
press {HOLD}. To resume the
conference, press {Conf}.
1 During an outside call, press
{LOCATOR/INTERCOM} to put the
call on hold.
2 To page a specific handset, enter its
extension number ({1} – {4}).
To page all handsets, press {0} or
wait for a few seconds.
3 Wait for the paged party to answer.
LIf the paged party does not answer,
press {LOCATOR/INTERCOM} to
return to the outside call.
4 To complete the transfer:
Press {SP-PHONE}.
LThe outside call is being routed to
the handset.
To establish a conference call:
Press {CONF}.
LTo leave the conference, press
{SP-PHONE}. The other parties
can continue the conversation.
LTo put the outside call on hold,
press {HOLD}. To resume the
conference, press {CONF}.
Answering transferred calls
Press {C} to answer the page.
Press {SP-PHONE} to answer the
page.
Note for handset and base unit:
LAfter the paging party disconnects,
you can talk to the outside caller.
Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {0}{0}{1}
2 Base unit:
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
3 Handset:
Press {OK}, then wait until a beep
sounds.
4 {OFF}
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.
Deregistering a handset
1
{MENU} i {0}{0}{2}
2 {3}{3}{5} i {OK}
3 Select the handset you want to
cancel by pressing the desired
handset number ({1} – {4}).
Base unit
Handset
Base unit
TG607X.book Page 39 Tuesday, December 12, 2006 1:56 PM