Filter
Top Products
Preparation
14 For assistance, please visit http://www.panasonic.com/help
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {MENU} i {0}{5}{1}
2 {V}/{^}: Select the desired setting.
3 {Save} i {OFF}
Date and time
Set the correct date and time.
– To use the available alarm function
(page 29).
– When you play back a message from
the answering system (page 31), the
unit announces the day and time it
was recorded.
1 {MENU} i {4}{1}
2 Enter the current month, day, and
year by selecting 2 digits for each.
Example: August 15, 2007
{0}{8} {1}{5} {0}{7}
3 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
4 {AM/PM}: Select “AM” or “PM”.
5 {Save} i {OFF}
Note:
LIf you make a mistake when entering
the date and time, press {<}, {>},
{^}, or {V} to move the cursor, then
make the correction.
LThe date and time may be incorrect
after a power failure. In this case, set
the date and time again.
Handset
Handset
TG607X.book Page 14 Tuesday, December 12, 2006 1:56 PM