Filter
Top Products
Useful Information
46 For assistance, please visit http://www.panasonic.com/help
*1 KX-TG6051/KX-TG6052/KX-TG6053/KX-TG6054
Caller ID
The Slow Talk feature does
not work.
*1
LIf you are on a conference call, you cannot use
the Slow Talk feature.
Problem Cause/solution
The handset does not
display the caller’s name
and/or phone number.
LYou have not subscribed to Caller ID service.
Contact your telephone service provider to
subscribe.
LIf your unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone line jack, disconnect the unit
from the equipment and plug the unit directly
into the wall jack.
LIf your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
LThe name display service may not be available
in some areas. Contact your telephone service
provider for details.
LOther telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
LThe caller requested not to send caller
information (page 21).
LGenerally, caller information is displayed from
the 2nd ring.
The handset or base unit
does not announce the
displayed caller names or
phone numbers.
*1
LThe handset or base unit’s ringer volume is
turned off. Adjust it (page 16, 27).
LThe Talking Caller ID feature is turned off. Turn it
on (page 28).
LThe ring count for the answering system is set to
“2” or “Toll saver”. Select a different setting
(page 34).
LIf the base unit and another handset are having
an intercom call, your handset does not
announce caller information.
The caller list/incoming
phone numbers are not
edited automatically.
LThe Caller ID number auto edit feature is turned
off. Turn it on and try again (page 26).
LYou need to call back the edited number to
activate Caller ID number auto edit.
Problem Cause/solution
TG602X_605X.book Page 46 Thursday, February 8, 2007 2:39 PM