Filter
Top Products
Useful Information
40 For assistance, please visit http://www.panasonic.com/help
Wall mounting
Base unit
1
Insert the hooks on the wall
mounting adaptor into the holes 1
and 2 on the base unit.
2 While pressing down the lever (A),
press it in the direction of the arrow
(B) until it is secure.
3 Tuck the telephone line cord inside
the wall mounting adaptor and
connect the cord. Mount the unit by
inserting the mounting pins into the
round openings on the adaptor (for
pin 2, use round cut out at the
bottom of the adaptor if you are using
the 4 inches phone plate), then
sliding the unit down to secure it.
Connect the AC adaptor to power
outlet (page 9).
LThere are two common types of
wall phone plates. The distance
between 1 and 2 may vary
depending on the size of the wall
phone plate installed.
2
1
2
1
A
B
83 mm
(3
1
/
4
inches)
102 mm
(4 inches)
2
1
83 mm
(3
1
/4 inches)
or
102 mm
(4 inches)
1
(120 V AC,
60 Hz)
2
AC adaptor cord
TG602X_605X.book Page 40 Thursday, February 8, 2007 2:39 PM