Filter
Top Products
Multi-unit Operation
For assistance, please visit http://www.panasonic.com/help 39
Transferring calls
between handsets,
conference calls
Outside calls can be transferred
between 2 handsets. 2 handsets can
have a conference call with an outside
party.
1 During an outside call, press
{INTERCOM} to put the call on hold.
2 {V}/{^}: Select the desired unit. i
{Transfer}
3 Wait for the paged party to answer.
LIf the paged party does not answer,
press {C} to return to the outside
call.
4 To complete the transfer:
Press {OFF}.
LThe outside call is being routed to
the handset.
To establish a conference call:
Press {Conf}.
LTo leave the conference, press
{OFF}. The other parties can
continue the conversation.
LTo put the outside call on hold,
press {HOLD}. To resume the
conference, press {Conf}.
Answering transferred calls
Press {C} to answer the page.
LAfter the paging party disconnects,
you can talk to the outside caller.
Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {0}{0}{1}
2 Base unit:
KX-TG6021/KX-TG6022/
KX-TG6023
Press and hold {LOCATOR} until
the IN USE indicator flashes.
KX-TG6051/KX-TG6052/
KX-TG6053/KX-TG6054
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
3 Handset:
Press {OK}, then wait until a beep
sounds.
4 {OFF}
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.
Deregistering a handset
1
{MENU} i {0}{0}{2}
2 {3}{3}{5} i {OK}
3 Select the handset you want to
cancel by pressing the desired
handset number ({1} – {4}).
Note:
LIf you do not use the handset, we
recommend removing the battery to
prevent malfunctioning.
TG602X_605X.book Page 39 Thursday, February 8, 2007 2:39 PM