Filter
Top Products
Answering System Features
For assistance, please visit http://www.panasonic.com/consumersupport 69
Caller’s recording time
You can change the maximum message
recording time allotted to each caller.
“1min”, “2min”, or “3min”: Caller
messages are limited to 1 minute to 3
minutes.
“Greeting only”: The unit plays the
greeting message but does not record
caller messages.
1 Press {MENU} (center of joystick).
2 Scroll to J, then press {SELECT}.
3 Scroll to “Recording time” then
press {SELECT}.
4 Push the joystick up or down repeatedly
to select the desired setting.
5 Press {SAVE}, then press {OFF}.
Message alert
You can select whether or not the
message indicator on the handset will
flash when new messages have been
recorded (page 62).
1 Press {MENU} (center of joystick).
2 Scroll to J, then press {SELECT}.
3 Scroll to “Message alert”, then press
{SELECT}.
4 Push the joystick up or down repeatedly
to select “On” or “Off”.
5 Press {SAVE}, then press {OFF}.
Note:
L The message indicator will not flash for
new messages while the handset is in
use.
L While message alert is on, battery
operating time will be shortened (page
13).
Turning call screening on/off
While a caller is leaving a message, you
can screen the call through the base unit
speaker.
1 Press {MENU} (center of joystick).
2 Scroll to J, then press {SELECT}.
3 Scroll to “Call screening”, then
press {SELECT}.
4 Push the joystick up or down repeatedly
to select “On” or “Off”.
5 Press {SAVE}, then press {OFF}.
TG5571_5576.book Page 69 Friday, June 10, 2005 6:46 PM