Filter
Top Products
Answering System Features
64 For assistance, please visit http://www.panasonic.com/consumersupport
Answering system commands
You can also operate the answering
system by pressing dial keys.
To use the following commands, press
{MENU} (center of joystick), then press
{PLAY}.
*1 If pressed within the first 5 seconds of a
message, the previous message will be
played.
*2 To resume operation, press a command
key within 15 seconds, or the voice
guidance will start.
Calling back (Caller ID subscribers
only)
If Caller ID information was received for
the call, you can call the caller back while
listening to a message.
Press {CALL} during playback.
Note:
L To edit the number before calling back,
press {EDIT} repeatedly to select the
desired format (page 35), then press
{CALL}, {C}, or {s}.
Recording a voice memo
You can use the base unit to leave a voice
memo (voice message) for yourself or
someone else (max. 3 minutes). Voice
memos can be played back later with the
same operation used to play back
answering system messages.
1 Press {MEMO}.
2 After the unit beeps, speak clearly
about 20 cm (8 inches) away from the
MIC.
L The display will show the elapsed
recording time.
3 To stop recording, press {MEMO} or
{STOP}.
Note:
L Voice memos are treated as new
messages.
L If your memo message is less than 1
second long, the unit beeps 6 times and
announces, “Your message was not
recorded. Record your message again.”
L When voice memos are played on the
handset, “MEMO” will be displayed.
Key Command
{1} Repeat message (during
playback)
*1
{2}