Filter
Top Products
Intercom Features
For assistance, please call 1-800-211-PANA (7262). 33
For KX-TG5453 users
Call the desired unit by selecting the
extension number, shown in the upper
right of each handset’s display. The base
unit’s extension number is 0.
LTo confirm the handset’s extension
number ([1], [2], or [3]), place the
handset on the base unit or charger.
LThe base unit will display the paging or
paged handset number (H1, H2, or
H3).
From the handset to the base unit
1 Handset:
Press {INTERCOM}, then press {0}.
LYou can also select the base unit by
pressing {V} or {^} then pressing
{>}.
LThe base unit will ring for 1 minute.
LTo stop paging, press {OFF}.
2 Base unit:
Press {CALL} to answer the page.
3 Handset:
When finished talking, press {OFF} or
place the handset on the charger.
Note:
LDuring an intercom call, the handset
user can switch to the speaker by
pressing {s}. To switch back to the
receiver, press {C}.
LTo adjust the base unit’s speaker
volume, press {>} or {<} repeatedly. 8
levels (high to low) are available.
From the base unit to a handset
1 Base unit:
Press {SELECT} repeatedly until the
desired handset’s extension number is
displayed on the base unit, then press
{CALL}.
LThe handset will beep for 1 minute.
LTo stop paging, press {CALL}.
2 Handset:
Press {C}, {s}, or {INTERCOM} to
answer the page.
3 Base unit:
When the paged party answers, speak
into the MIC.
4 Base unit:
When finished talking, press {CALL}.
Note:
LYou can locate a misplaced handset by
paging it. (Handset locator)
From one handset to another handset
Example: When handset 1 calls handset 3.
1 Handset 1:
Press {INTERCOM}, then press the
other handset number {3}.
LYou can also select the handset by
pressing {V} or {^} then pressing
{>}.
LThe paged handset will beep for 1
minute.
LTo stop paging, press {OFF}.
2 Handset 3:
Press {C}, {s}, or {INTERCOM} to
answer.
3 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
TG5451_5452_5453.book Page 33 Friday, February 18, 2005 11:38 AM