Filter
Top Products
Preparation
For assistance, please call 1-800-211-PANA (7262). 11
Battery charge
Place the handset on the base unit or
charger for 6 hours before initial use.
LThe unit will beep once, the CHARGE
indicator will light, and “Charging” will
be displayed.
L“Charge completed” is displayed
when the battery has been fully charged.
The CHARGE indicator will remain lit.
Base unit
Charger unit (KX-TG5452 and KX-
TG5453 only)
Note:
LTo ensure the battery charges properly,
clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean more
often if the unit is subject to grease, dust,
or high humidity.
Battery strength
You can confirm the battery strength on the
handset display.
Recharging the battery
Recharge the battery when:
–“Recharge battery” is displayed or
7 flashes on the handset display.
– the handset beeps intermittently while it
is in use.
Note:
LRecharge the handset battery for more
than 15 minutes, or the display will
continue showing the indication.
LIf the battery has been discharged, the
handset will display “Charge for 6h”
and 8 when you place the handset
on the base unit or charger.
CHARGE indicator
OR
CHARGE
indicator
Battery icon Battery strength
5 Fully charged
6 Medium
7 Low
When flashing: needs
to be recharged.
8 Discharged
TG5451_5452_5453.book Page 11 Friday, February 18, 2005 11:38 AM