Filter
Top Products
47
For assistance, please call: 1-800-211-PANA(7262)
FLASH Button
Pressing (FLASH/CALL!WAIT/VOICE!MAIL) allows you to use special
features of your host PBX such as transferring an extension call or
accessing special telephone services (optional) such as call waiting.
•Pressing (FLASH/CALL!WAIT/VOICE!MAIL) causes to release following
operations:
—temporary tone dialing, or
—muting your conversation.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. Your phone comes from the factory set to
“700 ms”.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (FUNCTION).
2
Scroll to “Program” by pressing Ö or Ñ.
3
Press á.
4
Press á at “Set flash time”.
•The current setting is displayed.
5
Select the desired time by pressing Ö or Ñ.
6
Press á (Save key) .
•A beep sounds.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF)
.
•If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
Flash time
:700ms
GF H
=Save
--------------
H
Set flash time
Save mailbox#
Flash time
:110ms
Ringer pattern
H
Program
--------------
Advanced Operation