Filter
Top Products
*
For quick access to your voice mail box by using
(FLASH/CALL!WAIT/VOICE!MAIL), you may add pauses between your voice
mail box access number and your mail box password in step 6.
EX. 1-222-333-4444 PPPP 8888
Your voice mail box access number Your mail box password
Pauses
Pressing (REDIAL/PAUSE) once creates a 3.5 seconds delay and counts as
one digit. The delay time depends on a telephone company.
43
For assistance, please call: 1-800-211-PANA(7262)
1
Press (FUNCTION).
2
Scroll to “Program” by pressing Ö or Ñ.
3
Press á.
4
Scroll to “Voicemail tone” by pressing
Ö or Ñ.
5
Press á.
6
Select “On” or “Off” by pressing Ö or Ñ.
7
Press á (Save key).
•A beep sounds.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
Setting the Voice Mail Tone
If your voice mail service sends a voice mail tone after a new message
has been recorded, set to “On”. “Voicemail” will be displayed and the
VM (Voice mail) indicator will flash when a message has been recorded in
your mailbox. You will hear a series of voice mail tones followed by a dial
tone after pressing or . (Contact your service provider for details
about your service.)
Set to “Off” if:
—you do not subscribe to a voice mail service,
—your voice mail service does not send a voice mail tone, or
—the unit is connected to a PBX.
Your phone comes from the factory set to “On”.
Make sure the unit is not being used and the handset is lifted off the
base unit.
Ringer pattern
H
Program
--------------
Save mailbox#
H
Voicemail tone
Set line mode
Voicemail tone
:On
GF H
=Save
Voicemail tone
:Off
Advanced Operation