Filter
Top Products
*9 If you register 2 or more key finders.
*10 If you have 2 or more key finders.
*11 You can set the handset display backlight while on charge.
– “On”: Backlight is on (dimmed).
– “Off”: Backlight turns off after 10 seconds of charging.
*12 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*13 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*14 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
You can access your service provider/telephone company “call waiting” service by having
the recall/flash time set at “100 msec.”, and then follow your service provider/telephone
company “call waiting” instructions to operate this service.
*15 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*16 This menu icon is displayed when the key finder is not registered.
Special programming
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Set the date and time beforehand
(page 14).
1 M
N (right soft key) #720
2 Select an alarm by pressing 1 to 3. a
MOKN
3 MbN: Select the desired alarm option. a
MOKN
“Off”
Turns alarm off. Go to step 9.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
Go to step 5.
“Weekly”
Alarm sounds weekly at the set time(s).
4 Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M
N. a MOKN
5 Set the desired time. a MOKN
6 Enter a text memo (10 characters max.;
page 40). a MOKN
7 MbN: Select the desired alarm tone. a
MOKN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8 MbN: Select the desired snooze setting.
a MOKN
9 MOKN a MeN
R When the alarm is set,
is displayed.
Note:
R Press M
N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
26
Programming
TG786xAL(en)_0111_ver002.pdf 26 2013/01/11 11:36:21