Filter
Top Products
IP8840 Broadworks IP Phone
User Guide
18 Dec. ‘08
08:30
Press Flexible Button
08:30
[05] Select Function
>*No Function
Speed Dial Function
Phone Book Function
Call Log Function
Mute Function
Headset Function
Redial Function
Previous
Next OK
08:30
[05] Enter number
12345
Å
Mode OK
08:30
[05] Enter Label
Richard
Å
Mode OK
Feature Description
11 Hold Function Places an active call on hold
12 Do not disturb Toggles the DND on and off
13 Set Ringer Off Toggles the ringer on and off
14 Message Function Views the number of new and old messages stored
in the Voice Mail server, and dials the Voice Mail
server by pressing the Dial softkey
To assign a function to a flexible button not used as a line:
o Press the Setting (
) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the
OK softkey.
o Dial 5, or move the cursor to 5.Flexible Key Setting using the Previous-Next softkeys and press
the OK softkey.
o Select the desired flexible button. An asterisk, », displays
in front of the current setting.
o Select a function using the Previous-Next soft key and
press the OK softkey. Refer to the flexible button functions
chart above.
o If the selected function is Speed dial, enter the speed
number and press the OK softkey. To enter alphanumeric
characters select the Mode softkey. Refer to Appendix A
for the character mapping of dial pad digits.
o If desired, enter a label, maximum 12 characters and press
the OK softkey to save the entry. To enter alphanumeric
characters select the Mode softkey. Refer to Appendix A
for the character mapping of dial pad digits.
o Move to another parameter with the navigation buttons and
continue the session or press the Setting (
) button to
exit the configuration session.