Filter
Top Products
Preparation
18 For assistance, please visit http://www.panasonic.com/phonehelp
Symbols used in these
operating instructions
Symbols used for operations
Registering the handset
Registering the handset
Register the handset to your base unit.
The handset will be assigned an extension
number by your base unit.
Important:
LBefore registering this handset or any
other compatible Panasonic units to
your base unit, we recommend you
change your base unit’s PIN so that
other Bluetooth devices in the area are
not accidentally registered at the same
time. For more information, see the
operating instructions included with your
base unit.
1 Base unit:
Press and hold {INTERCOM} until it
starts flashing and a beep sounds.
LAfter {INTERCOM} starts flashing,
the rest of the procedure must be
completed within 2 minutes.
2 Handset:
Press {OK} (F3), then wait until the
handset beeps.
LIf you have changed the base unit’s
PIN, enter it and press {OK}, then
wait until the handset beeps.
Note:
LIf for some reason the handset is not
registered to a base unit, use the
following procedure to register it to the
base unit.
{MENU} (F2) i x i {SELECT}
i “Registration” i {SELECT}
i “Registration” i {SELECT}
i Repeat step 1. i {OK}
If you have already canceled the unit’s
registration at the previous base unit,
follow steps 1 and 2.
Symbol Meaning
q, G,
i, s,
t, u,
v, H,
x
The symbols to the left
represent the handset
menu icons.
Example: q
Press the navigator key of
the handset up, down, left,
or right to select that menu
icon shown on the display.
Example:
“Ringer
volume”
Press the navigator key up
or down to select the words
in quotations shown on the
display.
i Proceed to the next
operation.
Example:
{MENU}
The words in the brackets
show button names on the
handset and base unit.
{^}, {V} Press the navigator key up
or down to scroll through
the displayed items.
{<}, {>} Press the navigator key left
or right to select the
desired items.
THA12_THA17.book Page 18 Tuesday, March 14, 2006 10:05 AM