Filter
Top Products
5. Communicating Within Your Office
576-29-750 DBS 576 & DBS 576HD (USA), issued October 1999 59
Also beginning with CPC Version 2.0, the busy party can reply with a text message
that displays on the camping on phone. Any one of the following messages can be
selected. Messages 6 to 9 and 0 have no default message text. All the messages can
be changed through system programming.
Table 7. Text Message Replies
Note: Camp-on (Call Waiting) can be set manually or automatically. However,
automatic Camp-on (Call Waiting) requires system programming.
1. Pick up the handset or press the ON/OFF key.
2. Dial the extension number.
3. After you hear a busy tone, enter the Camp-on (Call Waiting) Set code (default =
2). (The Called party hears an alert tone and you hear a ringback tone.)
4. Stay on the line until the called party answer.
Notes:
• If call waiting is accepted, the busy tone changes to a ringing tone.
• You cannot send a call waiting message to an extension that has DND turned
on.
Note: Automatic Camp-on (Call Waiting) requires system programming.
1. Pick up the handset or press the ON/OFF key.
2. Dial the extension number. (The called party hears an alert tone and you hear
ringback tone.)
Message No. Message Text Message No. Message Text
1 Take A Mes-
sage
6 User Defined
2 Please Hold 7 User Defined
3 Will Call Back 8 User Defined
4 Transfer 9 User Defined
5 Unavailable 0 User Defined
To manually camp-on to a line and notify a party that they
have a call waiting
To use Automatic Camp-on (Call Waiting)