Filter
Top Products
3. Placing Outside Calls
40 DBS 576 & DBS 576HD (USA), issued October 1999 576-26-750
1. Pick up the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. Press the AUTO key.
4. Enter the appropriate three digit speed dial bin number (PSD bins 80-99 or SSD
bins 00-79 or 000-799).
Checking Speed Dial Numbers
After speed dial numbers have been assigned, you can check to see what number has
been programmed by using soft keys or by entering the speed dial bin number.
Note: The following tasks require a display phone. To check speed dial numbers on
a non-display phone, see Appendix B, “Customized PSD Bin Numbers” on page 83
for your personalized list of speed dial numbers.
1. Press the MODE key one time. (SSD and PSD appear on the second line of the
display.)
2. Press the soft key next to SSD or PSD. (The first two speed dial entries appear
on the second line of the display.)
3. Scroll through the speed dial directory until the desired speed dial bin entry is
displayed. (To display the next two entries, press the # key. To display the
previous two entries, press the * key.)
4. Pick up the handset or press the ON/OFF key.
5. Press the CONF key.
6. Press the soft key next to the speed dial entry. (The speed dial number appears on
the display.)
1. From the Main Menu, press the soft key to the left of SYSTEM DIAL or
PERSONAL DIAL. (In the PSD directory, the first 10 speed dial entries are
displayed. In the SSD directory, 10 alphabetical entries are displayed.)
2. For the PSD directory, proceed to step 3.
To check a speed dial number using the soft keys on a small-
display phone
To check a speed dial number using the soft keys on a large-
display phone