Filter
Top Products
Programming
52
For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
For landline k
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 Generally, the line mode setting should not be adjusted. If S is not displayed on
the handset or the TEL indicator on the base unit does not light properly when
another phone connected to the same line is in use, you need to change the line
mode to “A”.
*3 This feature allows the unit to automatically adjust the date and time setting when
caller information from your landline service is received. To use this feature, set
the date and time first.
For IP line l
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
Feature Feature code Setting code Page
Caller ID edit
(Caller ID number auto
edit)
{2}{1}{4}{1}: <On> {0}: Off 44
Set dial mode
*1
{1}{2}{0}{1}: Pulse {2}: <Tone>27
Set flash time
*1
{1}{2}{1} –55
Set line mode
*1
*2
{1}{2}{2}{1}: A {2}: <B>–
Time adjustment
*1
*3
(Caller ID subscribers
only)
{2}{2}{6}{1}: <Caller
ID[auto]>
{2}: Manual
–
VM tone detect
*1
(Voice Mail tone detect)
{3}{3}{2}{1}: <On> {0}: Off 66
Feature Feature code Setting code Page
DHCP
*1
{5}{0}{0}{1}: <On> {0}: Off 28
Import ringtone {1}{7}{0} –71
IP settings
*1
{5}{0}{1} –29
joip message {3}{6}{0} –72
joip MSG alert
(A message alert)
{3}{6}{1}{1}: <On> {0}: Off 73
joip service {5}{3}{0} –73
My joip numbers {1}{0}{3} –30
Software version
*1
{7}{2}{4} –55
GT15xx.book Page 52 Wednesday, August 8, 2007 10:30 AM