Filter
Top Products
Preparation
27
For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Setting the unit before
use
Important:
L To program features by scrolling
through the display menus, see page
46.
L Mainly the direct command method is
used in these operating instructions.
Display language N
The default setting is “English”.
1 {OFF} i {MENU} i
{#}{1}{1}{0}
2 {V}/{^}: Select the desired setting.
3 Press down the center of the joystick
to save. i {OFF}
Voice guidance language N
You can select the language for the
voice guidance of the answering system
(page 61).
The default setting is “English”.
1 {MENU} i {#}{1}{1}{2}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {OFF}
Dialing mode k N
If you cannot make landline calls,
change this setting according to your
landline service. The default setting is
“Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {MENU} i {#}{1}{2}{0}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i {OFF}
Date and time N
Set the correct date and time so that:
– You can use the alarm function (page
54).
– The unit will announce the day and
time a message was recorded when
you play back on the answering
system (page 58). (BB-GT1540)
1 {MENU} i {#}{1}{0}{1}
2 Enter the current month, date, and
year by selecting 2 digits for each.
Example: August 15, 2007
{0}{8} {1}{5} {0}{7}
3 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
4 {AM/PM}: Select “AM” or “PM”.
5 {SAVE} i {OFF}
Note:
L When English is selected as the
display language, the 12-hour clock
format is used. When Spanish is
selected, the 24-hour clock format is
used.
L If you make a mistake when entering
the date and time, push the joystick
right, left, up, or down to move the
cursor, then make the correction.
Available model:
BB-GT1540
GT15xx.book Page 27 Wednesday, August 8, 2007 10:30 AM