Filter
Top Products
Preparation
23
For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Amber On L The base unit’s IP address may conflict with the
IP addresses of other devices on your local
network. Check the base unit’s static IP address
using the handset: {MENU} i {#}{5}{0}{1},
then check the IP addresses of the other devices
on your local network. If necessary, change the
base unit’s static IP address (page 29).
Flashing L The base unit is obtaining an IP address or is
obtaining configurations from the A service.
Please wait.
L The base unit is registering with the A service.
Please wait.
L If the STATUS indicator continues flashing, check
the following:
– Check the base unit’s IP address using the
handset: {MENU} i {#}{5}{0}{1}
If necessary, change the base unit’s static IP
address (page 29).
– If an IP address was not acquired, check your
network devices’ (router, modem, etc.)
connections. If the connections are made
properly but the problem persists, check your
network devices’ (router, modem, etc.) settings.
– Many installation issues can be resolved by
resetting all the equipment. First, shut down
your modem, router, base unit, and computer.
Then turn the devices back on one at a time in
this order: modem, router, base unit, computer.
– If you cannot access Internet Web pages using
your computer, check to see if your Internet
service provider is having connection issues in
your area.
– For more troubleshooting help, visit
www.joip.com or contact the A service
provider.
Flashing
rapidly
L Unplug the base unit’s AC adaptor to reset the
unit, then reconnect the AC adaptor. If the
STATUS indicator is still flashing rapidly, there
may be a problem with the base unit hardware.
Contact Panasonic service personnel.
Status Meaning
Color Light pattern
GT15xx.book Page 23 Wednesday, August 8, 2007 10:30 AM