Filter
Top Products
43
For assistance, please call: 1-800-211-PANA(7262)
*
For quick access to your voice mail box, you may add pauses between your
voice mail box access number and your mail box password in step 5.
EX. 1-222-333-4444 PPPP 8888
Your voice mail box access number Your mail box password
Pauses
Pressing (PAUSE/REDIAL) once creates a 3.5 second delay and counts as
one digit. The delay time depends on a telephone company.
1
Press (MUTE/FUNCTION).
2
Scroll to “Initial set” by pressing Ö or
Ñ, and press á.
3
Scroll to “Voice mail” by pressing Ö or
Ñ, and press á.
4
Scroll to “Save VM acces#” by pressing
Ö or Ñ, and press á.
5
Enter your access number, up to 32 digits.
•You may enter pauses
*
(see below).
•Each time you press
(HOLD/INTERCOM/CLEAR), a digit is erased.
To erase all digits, press and hold
(HOLD/INTERCOM/CLEAR).
6
Press Ö (Save key).
•A beep sounds.
•To exit the programming mode, press (OFF).
1234567PPP890
G
=Save
1234567PPP890
•You can exit the programming mode any time by pressing (OFF).
VM tone detect
H
Save VM acces#
--------------
Ringer setting
H
Initial set
--------------
Set tel line
H
Voice mail
HS register
To erase a stored number
Repeat steps 1 through 5 \ Press and hold (HOLD/INTERCOM/CLEAR)
until all of the digits are erased \ Ö (Save key).
•A beep sounds.
Advanced Operation