Filter
Top Products
34
Selecting characters to enter names
The handset dialing buttons ((0) to (9)) can be used to enter letters and
symbols. The letters are printed on the dialing buttons. Pressing each
button selects a character as shown below.
(HOLD/INTERCOM/CLEAR) erases characters.
For example, to enter “Tom Jones”:
1. Press (8) four times.
2. Press (6) three times, then press á.
3. Press (6) once, then press á twice.
4. Press (5) four times, press (6) three times,
then press á.
5. Press (6) twice, press (3) twice, then
press (7) four times.
If you make a mistake while entering a name:
Press Ü or á to move the cursor to the incorrect character, press
(HOLD/INTERCOM/CLEAR) to delete and enter the correct character. Each
time you press (HOLD/INTERCOM/CLEAR) a character is erased. To erase
all characters, press and hold (HOLD/INTERCOM/CLEAR).
Directory
0
Blank
1234567891011
#&’ ( ) , –. /1
abcABC2
def DEF3
ghi GHI 4
jklJKL5
mn o MNO6
pqr sPQRS7
tuvTUV8
wxyzWXYZ9
Number of times key is pressed
Keys
Ü
á
Moves the cursor to the left.
Moves the cursor to the right. (To enter another character using the
same number key, move the cursor to the next space.)
Tom Jo
Tom
To
Tom Jones
T
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(0)