Filter
Top Products
Troubleshooting
70
Answering System
The handset display exits the
Caller List or phone book.
• Do not pause for over 60 seconds while
searching.
The Ringer/Message Alert
indicator flashes slowly when
the handset is not ringing and
in use.
• The Message Alert is turned on and new
messages have been recorded. Turn the
Message Alert off (p. 24) or listen to the new
messages (p. 54, 55, 58).
You cannot have a
conversation using the
headset.
• Make sure the optional headset is connected
properly (p. 64).
•If “SP-phone” is displayed on the handset,
press [C] to switch to the headset.
Problem Cause & Remedy
The Answering System is on,
but incoming messages are
not recorded.
• The recording time is set to “Greeting only”.
Select “1 minute”, “2 minutes” or “3 minutes”
(p. 22).
• Memory is full. Erase unnecessary messages
(p. 57).
“ ” flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
• Memory is full. Erase unnecessary messages
(p. 57).
You cannot operate the
Answering System from the
base unit or the handset.
• If another user is in use, you may not be able
to operate the Answering System. Try again
later.
• If another user is listening to messages or the
Answering System is handling a call, you
cannot operate the Answering System. Try
again later.
You cannot operate the
Answering System from a
touch tone phone.
• Make sure you entered the correct remote
code (p. 59).
• The Answering System may not respond if
the tones are too short to activate the unit.
Press each button firmly.
• The Answering System is off. Turn it on
(p. 61).
Problem Cause & Remedy
FULL
PQQX13988YA.book 70 ページ ２００４年２月５日 木曜日 午前１０時５分