Filter
Top Products
Telephone System
For assistance, please call: 1-800-211-PANA(7262)
45
Transferring a Call
You can transfer an outside call to the base unit or the handset.
From the to the
From the to the
1 Handset:
(1)
During a call, press
[HOLD/INTERCOM]
.
• The call is put on hold.
(2) Press Base.
(3) Wait for the paged party to answer, then
you can announce the transfer.
• After the paged party answers, “Intercom
hold” is displayed.
• If the paged party does not answer, press [C]
or [s] to return to the outside call.
2 Base unit:
Press [SP-PHONE] or [LOCATOR/INTERCOM] to answer the page.
3 Handset: To complete the transfer, press [OFF].
1 Base unit:
During a call, press
[LOCATOR/INTERCOM]
.
• The call is put on hold.
• If the paged party does not answer, press [LOCATOR/INTERCOM] to return
to the outside call.
2 Handset:
Press [C], [s] or [HOLD/INTERCOM] to answer the page.
• You can also answer a call by pressing any button except [
d
], [
B
] or [OFF].
3 Base unit: To complete the transfer, press [SP-PHONE].
Handset Base Unit
Line on hold.
Transfer to
Base
K
Hold
Calling Base
Base Unit Handset
PQQX13988YA.book 45 ページ ２００４年２月５日 木曜日 午前１０時５分