Filter
Top Products
16
6. Press
OK
to confirm your selection.
will turn on if the handset
ringer is turned off.
Base Ringer Melody & volume
1. Press
PROG
during standby and press
e or f until you see
flashing.
2. Press
OK
to select.
3. Press e or f to listen to and select from the 5 melodies.
4. Press
OK
to confirm your selection and you will be prompted to
volume Setting.
5. Press
e or f to listen to and select from the different volume
levels.
6. Press
OK
to confirm your selection.
You have the option to turn off the base ringer.
You cannot program the base ringer if the handset has lost link with the
base. UNAVAIL will be displayed. Re-establish the link and try again.
Recall duration
When you are talking on the phone, pressing
will send a flash signal.
Recall settings are; Australia (Recall 1)100ms and New Zealand (Recall
2) 600ms. You should not need to change these settings.
.
1. Press
PROG
during standby and press
e or f until you see
flashing.
2. Press
OK
to select. The current duration is now displayed.
3. Press 1 or 2 directly or press e or f to select.
4. Press
OK
to confirm.
Register
Each handset can register to one base at a time only. The current base
will be deregistered when a new base is registered.
Each base can register up to 4 handsets.
1. Press
PROG
during standby and press
or until you see
icon flashing.
2. Press
OK
to select.