Oricom TP30 Amplified Phone User Manual


  Open as PDF
of 24
 
5
Wall Mounting
Wall Mounting
Desk Mounting
Fit the bracket as shown in the illustration. Insert the brackets three tabs
into the matching slots on the bottom of the phone and click into place.
Caution:Beforeinstallingorchanging
thebattery,makesurethatthe
telephoneisnotconnectedtothe
telephonenetworkorthemainspower.
MadeinChina
Wall Mounting
1. Fit the bracket as shown in the illustration. Insert the braqckets three tabs
into the matching slots on the bottom of the phone and click into place.
2.Drilltwoholesvertically,oneabovetheother,83mmapart,andleave
the screws protruding from the wall by 5mm.
3.Turnaroundthehandsethook(locatedbythehookswitch)by180
degress, so it will hold the handset in place when the phone is
mounted on the wall.
4. Position the mounting holes on the base of the phone over the two
protruding screws on the wall plate or on the wall. Gently push the
phone ush against the wall plate then slide the phone downwards
locking it into place.
Bracket postion for
desk mounting
Bracket postion for
wall mounting
 previous next