11
Redialling the last dialled number
1. Press
. The last number dialled is displayed.
2.
turns on when the number contains more than 12 digits. Press
OK
to view the off-page digits.
3. Press
to dial out the number.
During an external call
Call timer
The call timer will be displayed a short while after your call is connected.
It shows the duration of the call. This timer is shown in minutes and
seconds (MM-SS) in the first hour. After that, it will be shown in hours
and minutes (HH-MM) with the “-“ blinking to indicate the seconds.
When you end a call, the timer will be displayed for 5 more seconds
before the screen returns to the handset label.
Adjusting the volume
Press
to adjust the receiver volume. The display shows the
volume level of high “
OOO”, medium “OO” or low “O”.
Muting the call
1. Press
MUTE
to mute the call.
turns on. The caller would not be
able to hear you but you would still be able to hear the caller.
2. Press MUTE again to unmute the call.
Chain dialling
You can dial out numbers from the phonebook even after you have seized
the phone line. And there is no limit to the number of times chain dialling
is accessed.
1. Press .
turns on.
2. Press
to scroll through the phonebook records. Or you can
use the number keys to jump directly to the record starting with the
corresponding letters of that key. If you decide to quit using chain
dialling, simply press to exit.
3. Press
OK
to dial out the number.
01-10