Filter
Top Products
12 CALLER ID OPERATION
Caller ID Service
The caller’s information will be displayed and recorded if
YOUHAVESUBSCRIBEDTO#ALLER)$SERVICEFROMYOURLOCAL
telephone company.
When the telephone rings, the caller’s information will be
DISPLAYEDONTHEHANDSET,#$DISPLAY4HISINFORMATION
includes the phone number and name (if supported). The
handset can store up 20 calls for later review (a name of
16 characters and a phone number of 24 digits for each
record). When the memory is full, a new call automatically
replaces the oldest call in the memory.
Note:
)FTHECALLERSINFORMATIONINCLUDES$ATE4IMETHE$ATE
Time will be stored with the record.
If the caller number is the same as one of phonebook
memory, the matched name stored in the phonebook
memory will be displayed.
The handset will prompt user if there is a missed call. When
the handset is in standby mode, “
” will be displayed prior
to other display information.
If all the missed calls are reviewed, the display “
” will
disappear.
Call waiting
9OUCANUSETHERECALLBUTTONTOANSWERASECONDCALLWHILE
you are on the phone. However this service will need to
be turned on. For example to turn on Telstra’s Call Waiting
service:
1. Press [
] to wait for dial tone then Press [ ] [ 4 ]
[ 3 ] [
].
9OUWILLHEARASERVICETONETHEN0RESS;
].
Take two different calls at the same time
If you have subscribed to your telephone network operators
#ALL7AITING#ALLER)$SERVICEYOURPHONEWILLDISPLAYTHE
number of the second incoming call for around 20 seconds
while you are talking on the phone.
$URINGACALLYOUWILLHEARTWOLOUDBEEPSPERIODICALLYTO
notify you of another incoming call. If you wish to answer
this call
1. When the handset receives a second call, the number
of the caller appears on the display. It will display for 20
seconds or until you press a key on the phone. Press
[
] to listen for dial tone then Press [ 2 ] to put the
current call on hold and talk with the second caller.
3UBSEQUENTPRESSESOF;
] to listen for dial tone
then Press [ 2 ] will toggle you between these 2 callers.