Oricom ECO90 Cordless Telephone User Manual


  Open as PDF
of 32
 
8 BASIC OPERATION
Make a Call
1. Press the [ ] or [ ] key, wait for a dial tone, then
dial the desired number.
2. After finishing the conversation, press [
] key or
place the cordless handset into the charger.
The talk timer will be shown during talk.
Note:
In standby mode press and holding [
] or [ ] for 1.5
seconds, the number associated with the [
] or [ ]
key will dial out.
Pre-dialling
1. When the handset is in standby mode, input the desired
number.
2. Press [
] key to cancel the wrong digit, input the
correct one again. If a pause is needed during dialling,
press and hold [
] key for a while and character “P”
will be shown. A 3 seconds pause will be added while
dialling.
3. Press the [
] or [ ] key, the number will be
automatically dialled out.
4. After finishing the conversation, press [
] key or
place the cordless handset into the charger.
The talk timer will be shown during talk.
Adjust the Receiver and Speakerphone
Volume
7HILETHEPHONEISINTALKMODEPRESS;=OR;n=KEYON
the handset to adjust the receiver or speaker volume of
the handset. The display will show the current volume level
during adjusting.
Answer a Call
7HENTHEPHONERINGSTHEHANDSET,%$WILLFLASHAND
THE,#$ONTHEHANDSETWILLSHOWh2).').'v)FYOUHAVE
SUBSCRIBEDTO#ALLER)$SERVICEFROMYOURLOCALTELEPHONE
company, the incoming call information will be shown.
1. Press the [
] or [ ] key to answer a call.
2. After finishing the conversation, press [
] key or
place the cordless handset into the charger cradle.
Auto Answer
1. If you turn on the “AUTO TALK”, you just need to pick
up the cordless handset from the charger cradle to
answer the call directly, needn’t press [
] or [ ]
key.
2. After finishing the conversation, press [
] key or
place the cordless handset into the charger cradle.
 previous next