Filter
Top Products
The Answering Machine
26
1. Press on the handset.
2. Select SETTINGS Æ ANS MACHINE Æ RING DELAY. Press .
3. Select the new setting. Press . The new setting is saved.
REMOTE ACCESS
You can operate your answering machine when you are away from home by calling your phone from a
touch tone phone and entering a 3-digit remote access PIN code.
Changing your remote access code
The remote access PIN code is used for operating your answering machine remotely. The pre-set RA
PIN code is 000. You can personalize the RA PIN code for greater security.
1. Press on the handset.
2. Select SETTINGS Æ ANS MACHINE Æ RA PIN CODE. Press .
3. Enter your current RA PIN code (Pre-set: 000). Press .
4. Enter a new 3-digit RA PIN code. Press .
5. Enter the new 3-digit RA PIN code again for verification.
6. Press . The new setting is saved.
Accessing your ANSWERING SYSTEM remotely
1. Make a call to your phone.
2. Press * when OGM starts playing.
3. Enter your RA PIN code. You now have access to your answering machine.
4. Press a key to carry out a function. See the Remote Access Commands Tables in the
Appendix for a list of available functions.
NOTE
:
Your phone will hang up automatically if no key is pressed for 8 seconds.
NOTE
:
You have 3 tries to enter the correct remote access PIN code before your
p
hone han
g
s u
p
.
TIP
:
Toll Saver. Toll saver is a cost effective way to manage your messages
when accessing your answering machine remotely. When toll saver is selected,
your answering machine will pick up the call after 2 rings if you have new
messages or 4 rings if you have no new message.
NOTE: The REMOTE ACCESS (RA) PIN is different from your 4-digit system PIN.
TIP
:
Press 5 to stop the current operation and r
e
-start from the beginning.