Filter
Top Products
The System
20
VOICEMAIL INDICATION
Voicemail indication is a visual voicemail alert. On the ECO600, you see an envelope icon when
there is a voicemail waiting in your service providers mailbox(es).
Retrieving voicemail(s)
To retrieve your voicemail(s), consult your service providers instructions.
Clearing the voicemail indicator
After checking your voicemail(s), the voicemail indicator will be cleared automatically after
receiving a signal from the network. If you want to, you can also clear the voicemail indicator
manually if it fails to reset.
1. Reset the power of the base unit (Unplug the power adaptor of the base unit. Wait for
30 seconds. Plug in the power adaptor again.) The voicemail indicator will be cleared.
The System
REGISTERING YOUR HANDSET
Registration allows communication between your base unit and handset(s). If your handset is not
registered, you will not be able to make a call or use some of the functions and features on the
phone.
If your handset displays UNREGISTERED, follow the steps below to register your handset.
1. Press PAGE on the base unit for 4 seconds.
2. Press on the handset.
3. Select SYSTEM Æ REGISTER. Press .
4. Enter the system PIN (Pre-set: 0000). Press OK.
5. Press 1 to select the base number you want. Your handset starts searching for the base.
Registration shall be completed within 30 seconds. If registration is successful, the signal
icon displays steadily. If registration failed, repeat the above procedure.
NOTE
:
Your base can register up to 4 handsets. After registering 4 handsets,
your base unit registration memory is full. If you attempt to register an
additional handset, registration will not be successful.
NOTE
:
Your handset is already registered when you buy 1-4 handset packs.
NOTE
:
Voicemail Indication Service. Consult and subscribe from your service
providers service.
TIP: Use or to navigate the menus.