10
4. After all your messages have been played, you hear two short beeps.
You have 10 seconds to access the menu again, otherwise, the
AM880 disconnects automatically.
Press: To:
7# Remote Turn on/off the AM880
If you forget to turn your AM880 on, you can phone
in from a remote location to turn it on.
1. Call your telephone number.
2. The AM880 answers after 10 rings. After the
beep, enter your 3-digit security Code.
3. After the second beep, press 7# then hang up.
Subsequent messages will be recorded
8# Re-record an OGM
1. When you hear a beep, begin recording your new
OGM (up to 5 minutes).
2. When you have finished recording your new
OGM, press 5#.
The new OGM will playback to you.
3. Hang up the telephone.
9# Remote Record Memo
If you press 9# (to record memo):
1. When you hear a beep, begin recording your
memo.
2. When you have finished recording your memo
message, press 5#.
(press 5# to stop recording)
0# Remote Room monitoring
If you press 0# (to room monitoring):
1. The built-in microphone of your answering
machine will be switched on and you can then
listen in on the room.
2. Every 30 seconds you will hear a beep. If you
want to continue listening, press 0# again within
10 seconds. Otherwise the AM880 will hang up.
3. To end room monitoring, hang up the telephone
or press 5# if you want to use other remote
functions.