Filter
Top Products
13
EN
DUAL WATCH (DW)
The Dual Watch feature allows you to monitor more than one channel
simultaneously.
To set Dual Watch:
1. Press
6 times until “DW” appears and the channel number
starts ashing.
2. Press and hold
or to select a watch channel (1-8).
3. Press
to conrm and exit the menu. Or, press to
conrm an
d go to the next Menu Option. Once set, the display will
toggle between 2 open channels and the unit will be able to receive
transmissions from the 2 channels (your existing channel and the
channel set in DW).
To disable Dual Watch:
Follow steps 2-3 above and select “0” for step 2.
SCAN FOR A CHANNEL / CTCSS
There are 2 scenarios when scanning for a channel / CTCSS is
necessary:
1. If you have a CTCSS code set and want to make sure that the
channel is not busy.
2. If you are in a fringe area and the radio is cutting in and out.
To auto-scan for a channel / CTCSS:
1. Press and hold
. The unit will go to monitor mode.
2. Press an
d release , the unit will start enter scan mode.
3. Once an active channel is found the unit will stop scanning. Press
to communicate with other radios on that channel or to
resume scanning.
P/N:086L004722-016 REV.1 PAGE: 15/152