Filter
Top Products
8
EN
VOLUME
To change the volume level:
Use
or to increase or decrease volume.
RESET
To reset the unit:
Remove the batteries for two minutes and insert them again.
TALK TO ANOTHER TRANSCEIVER
For best transmission speak about 5 cm away from the radio and leave a
short pause before speaking once you have pressed .
To talk to another transceiver:
1. Pres
s and hold to check if the channel is free.
2. Press and h
old and speak into the microphone to transmit.
When nis
hed, release the button. The transceiver will automatically
play received transmissions.
3. Release
once you have nished speaking to allow other
radios
to respond.
NOTE: You can only communicate with another transceiver that is on the
same channel and using the same CTCSS code as your transceiver.
PAGE ANOTHER TRANSCEIVER
To page all transceivers tuned to the same channel:
Press .
NOTE: The call tone will be heard from your device and from the receiving
party’s unit at the same time.
P/N:086L004722-016 REV.1 PAGE: 10/152