Filter
Top Products
EN
Use this feature to make calls which require a sequence of numbers such as using a calling card
for a frequently called long distance number. Basically, you dial each part of the sequence from
memory. The following example shows how you can use chain dialing to make a call through a
long distance service:
The Number For Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9
1. Make sure the phone is ON.
2. Press mem and then press 7.
3. When you hear the access tone, press mem again and then press 8.
4. At the next access tone, press mem and then 9.
TIP: Wait for the access tones between pressing the memory button, or your call might not
go through.
Keep track of baking or cooking times with the built-in, easy-to-read digital display timer. A loud
two-minute alarm sounds when countdown time expires.
Both handset and the Spacemaker® has the timer functions.
At the handset
1. Make sure the handset is OFF (not in TALK mode).
2. Press the timer button.
3. The unit displays
SET TIMER 00 MIN 00 SEC
, and the first digit (minutes) blinks in the display.
4. Press the desired number 0-9.
5. After the first digit is entered, the second digit blinks.
6. Continue entering digits for the number of seconds you want to set.
At the Spacemaker®
1. Make sure the speakerphone is OFF (not in TALK mode).
2. Press the timer button.
3. The unit displays
SET TIMER 00 MIN 00 SEC
, and the first digit (minutes) blinks in the display.
4. Press CID VOL(-) arrow key to change the value of the blinking digit.
CHAIN DIALING FROM MEMORY
PROGRAMMABLE TIMER
SETTING THE TIMER
33
os6976-en1.p65 5/6/2005, 10:33 AM36