Filter
Top Products
EN
3. Press and hold the format button on the Spacemaker® until you hear a beep and
PRESS AND
HOLD BASE PAGE KEY
shows in the display.
4. Press and hold the page button on the wall base unit.
NOTE: You must press the page button on the wall base unit within 30 seconds to
continue registration.
5. You will hear a confirmation tone when the registration is complete, and the charge unit’s
display shows
REGISTERED
.
1. Press the speaker button and begin speaking.
2. When finished, press speaker button again to hang up.
Press the speaker button when reviewing a Caller ID record.
When the handset is ON (in TALK mode),
LINE IN USE
shows in the display of the Spacemaker® if
it is OFF (not in TALK mode).
When the charge speakerphone is engaged with an external call (
LINE IN USE
shows in the
handset display), press the TALK/call back button on the handset to start the 3-way conference.
NOTE: If handset is ON, press speaker button on charge speakerphone will join the call,
too.
1. While the charge speakerphone is ON (in TALK mode), press the TALK/CALLBACK button on the
handset to join the call.
2. Press the speaker button to hang up the charge speakerphone.
Use the flash/program button to activate custom calling services such as call waiting or call
transfer, which are available through your local phone company.
TIP: Don’t use the speaker button to activate custom calling services such as call waiting,
or you’ll hang up the phone.
RECEIVING A CALL
MAKING A CALL
LINE IN USE
3-WAY CONFERENCING
CALL TRANSER
FLASH
23
os6976-en1.p65 5/6/2005, 10:32 AM26