Filter
Top Products
EN
2. Use the CID VOL(+) / CID VOL(-) arrow keys to select
ON
or
OFF
. Default is
ON
.
NOTE: When the pointer > is moved to ON, the unit announces ANSWER ON, PRESS
REVIEW KEY TO RECEIVE SETUP INSTRUCTIONS. When it points to OFF, the unit
announces ANSWER OFF.
3. Press the flash/program button to store (if a change is made, you will hear a confirmation tone).
You may set the number of times you want the phone to ring before the answering system
answers a call.
1. When speakerphone is OFF (not in TALK mode), press flash/program button and CID VOL(+) /
CID VOL(-) arrow keys to move the pointer > to point at
RING TO ANSWER
, press flash/program
button to show
RING TO ANSWER 3 4 5 6.
2. Use the CID VOL(+) / CID VOL(-) arrow keys to select the desire rings to answer. Default is
5
.
3. Press the flash/program button to store (if a change is made, you will hear a confirmation tone).
The product provides you with the ability to access the answering system from a tone dialing
telephone in another location. A security code is required for remote access, and it prevents
unauthorized access to your answering system. Default security code is 1 2 3, and you may only
change the security code at the Spacemaker®.
1. When speakerphone is OFF (not in TALK mode), press flash/program button and CID VOL(+) /
CID VOL(-) arrow keys to move the pointer > to point at
SECURITY CODE,
press flash/program
button to show
SECURITY CODE 1 2 3
with the first digit blinking.
2. Press CID VOL(-) arrow key to change the value of the blinking digit.
3. Press CID VOL(+) arrow key to blink the next digit.
4. Press the flash/program button to store (if a change is made, you will hear a confirmation tone).
SETTING THE RINGS TO ANSWER
RING TO AN
S
3 4
SETTING THE SECURITY CODE FOR REMOTE ACCESS
CHARGE UNIT
SECURITY C
O
1 2 3
16
os6976-en1.p65 5/6/2005, 10:32 AM19