Filter
Top Products
18
Regular telephone
Remote Call Forward
From any telephone within the
Meridian 1 system, simply lift the
handset and use the following
procedures. From any telephone
outside the system, first dial the Direct
Inward System Access (DISA) number
of your system and wait for dial tone.
Your system administrator can tell you
the DISA number, the Remote Call
Forward codes and the
end-of-entry digits.
You may hear a confirmation tone after
entering the main extension number,
telling you the password and
extension match. You may hear a
second special tone after dialing the
end-of-entry digits, telling you the
procedure was successful. If you hear
a fast busy signal, hang up and try
again.
Activate Remote Call Forward:
1 Dial the Remote Call Forward
Activate code.
2 Dial the Electronic Lock password
associated with your telephone
(see Electronic Lock, page 13).
3 Dial the main extension number of
the telephone.
4 Dial the number where you want
your calls forwarded.
5 Dial the end-of-entry digit(s).
Note: You can omit step 4 and have
calls forwarded to the previously
programmed forward number.
Cancel RCFW:
1 Dial the Remote Call Forward
Deactivate code.
2 Dial the Electronic Lock password
associated with your telephone.
3 Dial the main extension number of
the telephone.
4 Dial the end-of-entry digit(s).