Nortel Networks Regular Telephone Telephone User Manual


 
9
Regular telephone
Conference
Use Conference to set up a
conversation between yourself and up
to five other people.
To set up a conference call (you are on a
call and you wish to add one person or
more to your call):
1 Flash the switchhook or press LINK.
You hear three beeps followed by
dial tone.
2 Dial the telephone number of the
person to be included in your call.
You hear ringback or busy signal.
3 If you hear ringback, wait for the
person to answer. Anything you say
to this person cannot be heard by
the original caller.
To connect the original caller, flash
the switchhook or press LINK
again. All three of you are
connected.
or
If your hear a busy signal, flash the
switchhook to return to the original
caller.
4 You can include up to six parties,
including yourself, in your call by
repeating the above procedures.
To disconnect the last caller from the
call (if the caller is on an outside trunk):
1 Flash the switchhook. You hear
three beeps followed by dial tone.
2 Dial SPRE 87 or C6DS FFC.