Filter
Top Products
46 System software maintenance
Step Action
1 At the server (host server), insert the MCG 3100 software CD
into the CD-ROM drive.
2 Log on to the server as nortel.
3 Locate the MCG 3100 software on the CD and run the following
command:
appinstall
4 Enter the root password.
5 If you are prompted to remove a previous installation, enter Y
(Yes) to confirm the deletion.
6 If you are prompted to perform a reinstall (1) or an upgrade (2),
press Enter to accept the default value (2).
The application RPM files are installed in the /opt/mobilitybase
directory.
7 Read the Nortel software license agreement.
8 To agree to the license agreement, enter YES
9 For a redundant server implementation, repeat Step 1 to Step
8 on the second server.
--End--
Procedure 13
Upgrading the MCG 3100 system software from the Web
ATTENTION
You must have access to the Nortel Enterprise Solutions PEP Library (ESPL)
and you must know the MCG 3100 root password to perform the following
procedure.
ATTENTION
If you have previously installed an SU, you must remove it before installing a
new SU. For more information, see Procedure 14 “Removing an SU” (page 48)
Step Action
1 From an internet-connected computer, connect to
h
ttp://www.nortel.com/espl.
2 After logging in, read the warning and then click Click Here.
3 Scroll to the Communication Server 1000 / Meridan 1 PEP Tools
section, locate the Patching Reference for CS 1000 Release 5.0
Systems, and click Click Here beside the entry.
Nortel Mobile Communication 3100 Series Portfolio
Nortel Mobile Communication Gateway 3100 Installation and Upgrades
NN42030-300 02.03 Standard
9 May 2008
Copyright © 2007, 2008 Nortel Networks
.