Filter
Top Products
Chapter 2 Entering keycodes on the BCM system 11
Keycode Installation Guide
Chapter 2
Entering keycodes on the BCM system
There are five ways to enter keycodes:
• “Loading a keycode using Element Manager” on page 11
• “Manually adding a keycode using Element Manager” on page 12
• “Adding a keycode using the telset administration interface” on page 13
• “Loading a keycode using the Startup Profile” on page 15
• “Loading a keycode using Network Configuration Manager” on page 15
Loading a keycode using Element Manager
If you retrieved a keycode file from the Keycode Retrieval System (KRS), use this method.
To load a keycode file:
1 Log on to Element Manager and select the BCM you want to access.
For information about how to log on to Element Manager, refer to your administration guide.
2 On the Task Navigation Panel, select the Configuration tab.
The configuration folders appear.
3 Select the System folder and click the Keycodes task.
The Keycodes panel appears.
4 Click Load File.
The Open file dialog box appears.
5 Browse to where you saved the keycode file you downloaded from KRS.
6 Click Open.
The file uploads and the feature appears in the Keycodes list.
Note: You must have access privileges to enter a keycode on the BCM system.
Contact your system administrator for more information.
Warning: You must reboot your BCM system if a dialog box prompts you to do
so.