Filter
Top Products
Page 5 Enterprise Edge M7324 Quick Feature Guide P0908514 Issue 03
Setting up the telephone
ATTENTION
Before attempting to carry
out
any
work on the telephone, ensure
that the line cord is unplugged from the
wall socket.
To remove any of the cords, squeeze the
release latch on the plug and gently pull
the plug from the socket.
Connect the handset cord to the jack
labelled with the telephone icon and route
the cord as shown.
If you are using a headset, route the cord
along the channel in the base and connect
the cord to the telephone jack that is
marked with the headset icon.
Route the line cord through the stand and
connect the cord to the telephone jack
that is marked with the jack icon.
Attach the stand using the slots on the
back of the telephone.
Once the above work is complete, plug
the line cord back into its wall socket.
Connecting the cords
Connect to jack
from distribution block
Connect to receiver