Filter
Top Products
Additional features and controls
79
Additional features and controls
Enter text using the dialpad
You can use the dialpad to enter text when you use features.
For example, if you want to use the letter “A”, press the number 2 key
once. If you want the letter “C”, press the number 2 key three times.
Note: No letters are associated with the number 1 or the 0 keys.
Use the Symbol key to enter special characters
When entering text into a directory name, surname etc. you will see a
“flashing cursor” on the information line above the bottom soft keys.
At this point you can press one of the keys on the dialpad. The following
list shows what each keypad press will display:
For example, if you press Key 2, the letter “A” will replace the flashing
cursor for approximately four seconds. The Symbol key will appear as
the third soft key from the left.
Key 1 - Nothing
Key 2 - AÀÁÂÃÄÅÆBCÇaàáâãäåæbcç2
Key 3 - DEÈÉÊËFdeèéêëf3
Key 4 - GHIÌÍÎÏghiìíîï4
Key 5 - JKLjkl5
Key 6 - MNÑOÒÓÔÕÖØmnñoòóôõöø6
Key 7 - PQRSpqrs7
Key 8 - TUÙÚÛÜVtuùúûüv8
Key 9 - WXYÝÞßZwxyýþÿz9
Key # - !"#$%&'()*+,-./0123456