Filter
Top Products
Telephone setup
27
Time offset
When your IP Phone 1140E is located in a different time zone than your
system, the display shows the system time instead of the local time. The
Time Offset feature allows you to adjust the time that appears on the
display. Before you begin, calculate the time difference, in hours, between
the server time and local time.
To change the time that appears on your telephone display to local time,
use the following steps:
1. Press Feature *510.
2. Press Change.
3. Press * to switch between adding or subtracting time.
4. Using the dialpad, enter the number of hours between local time and
system time.
Note: Press # to enter half-hour increments.
5. Press OK.
Note: It may take up to 1 minute for the change to appear on the
display.
About your programmable buttons
Your System Administrator assigns the six programmable buttons as line,
intercom or memory buttons. The label for each button appears on the
display next to the button. For more information, see your System
Administrator.
Memory buttons
These are buttons that are not assigned as line or intercom buttons.
Memory buttons store internal and external phone numbers or features to
give you one-touch dialing or feature activation.
Program memory buttons
You can program a memory button with a new number or feature.