Filter
Top Products
Configuring options
23
When you do not want to use Bluetooth
If a Bluetooth headset is connected, and you want to use the wired
headset, you can switch between the two. It is not necessary to unpair or
disable Bluetooth.
To switch between a wired headset and Bluetooth:
1. Double-press the key to open the 3. Bluetooth Setup dialog
box.
2. Press the Left/Right navigation key to select the Use BT Headset
item.
3. Press the Enter key to toggle this option on or off.
A check mark indicates that the Bluetooth headset is used. Clear the
check mark to use a wired headset. On (o) by default.
To unpair a Bluetooth Headset:
1. Double-press the key to open the 3. Bluetooth Setup dialog
box.
2. Press the Right navigation key to select the Paired: item.
3. Choose one of the following:
• If your headset is displayed in the Paired combo box, proceed to
step 5.
• If more than one device is paired, and your headset is not already
displayed in the Paired combo box, do the following:
a. Press the Right navigation key to select the Paired: combo box.
Press the Enter key to open edit mode.
b. Press the Up/Down navigation keys to open the list. Press the
Up/Down navigations key to scroll in the list and highlight your
headset.
c. Press the Enter key to select the headset and close the combo
box. Press the Enter key to exit edit mode.
4. Press the Right navigation key to select the UnPair button (next to
the UnPair Device item).
5. Press the Enter key.