Play the next song
Press
.
Play the previous song
Press
twice.
Start the current song from the beginning
Press
.
Scroll through the current song quickly
Press and hold
or .
Stop playing
Press and hold
.
Change the volume
Use the volume knob.
If supported, you can also change the headset volume on the connected A2DP device.
Settings
Switch the indicator lights off
You can switch the indicator lights off if you do not want them to be shown, for example,
during a call.
When the headset is connected to a device, press and hold
and for 5 seconds. A
red indicator light flashes.
Some indicator lights may still be shown, for example, when the battery charge is low.
Switch the lights back on
When the headset is connected to a device, press and hold
and for 5 seconds. A
green indicator light flashes.
Clear the pairings
You can clear the paired devices list on your headset.
Switch the headset off, and press and hold
for 9 seconds. The headset beeps twice,
and the red and green indicator lights alternate. After the settings are cleared, pairing
mode is activated.
7