Filter
Top Products
Check the battery charge
With your headset connected to your mobile device, press
. A green light indicates a
sufficient charge level. If the light is yellow, you may need to recharge the battery soon.
If the light is red, recharge the battery.
Switch the headset on
Press and hold
for 2 seconds. The headset beeps, and a green indicator light flashes
once. The headset automatically connects to the last connected device. If you have never
paired your headset with a device, or you have cleared the pairings, pairing mode is
activated.
Switch the headset off
Press and hold
for 4 seconds. The headset beeps, and a red indicator light flashes
once.
If the headset is not connected to a device within 30 minutes, it switches off.
Pair and connect your headset
Before using the headset, you must pair and connect it with a compatible device.
1 Make sure the headset is switched off.
2 Activate the Bluetooth feature on your compatible device.
3 Switch the headset on. If you have never paired your headset with a device, or you
have cleared the pairings, pairing mode is activated automatically. If you have
previously paired your headset with a device, press and hold
for 5 seconds. The
green indicator light starts to flash quickly.
4 Within about 3 minutes, set your device to search for Bluetooth devices. For details,
see the user guide of the device.
5 On your device, select the headset from the list of found devices.
6 If required, enter the passcode 0000.
In some devices, you may need to make the connection separately after pairing.
When the headset is paired and connected, the green indicator light flashes slowly.
If your mobile device supports the A2DP Bluetooth profile and has a music player feature,
you can also use your device to play music through the headset. If your mobile device
does not support the A2DP profile, you can separately pair the headset with a music
player that supports this profile. If you have paired and connected the headset to your
mobile device, disconnect the headset from it before pairing the headset with the music
player.
4